Onitex U200 Capping

The capper is equipped with an automatic cap feeding system from the hopper. Suitable for packaging tobacco products, cosmetics and household chemicals.

Appearance

The design of the machine allows the installation of various modules depending on the task:

Touch screen

All modules of the machine are controlled and configured from the screen, settings templates are switched for different containers. Two synchronized panels for operator convenience.

Capping head

Stainless steel transporter

Belt conveyor

Conveyor belts continuously feed containers to the capping machine

Pneumatic cylinder

For raising and lowering the capping head.

Cap feed line to the capping area

Divider of containers

Stainless steel cap storage

Stainless steel frame

Provides rigidity of the entire structure and the possibility of easy installation of modules necessary for solving the problem.

Cap elevator and sorter

Features

Designed for manufacturers with a large range of products and high requirements for the best quality.

We currently provide automatic capping machines to companies operating in the following industries:

  • Food industry
  • Cosmetic industry
  • Tobacco industry
  • Chemical industry

Automatic cap feeder

The capper is equipped with an automatic cap feeding system from the hopper.


    Productivity

    Productivity is up to 2 000 units per hour. Easy and fast readjustment due to the template system and replaceable equipment.


    Accuracy

    Accurate positioning of the cap in the capping head is achieved by gripping and holding the cap under vacuum.


      Synchronous drive

      The speed of the conveyor and any machine module does not depend on the load, mains voltage or other external factors: adjustment during operation is not necessary. You can set up the machine and leave it for 10 years: the set speeds and delays of the machine will not change.


      Onitex VA100 Control System

      The control system and its interface are primarily responsible for ease of operation and readjustment.

      Touch screen

      The control panel is ready for operation in half a second after the machine is powered on. Any setting is available in two or three finger touches, the responsiveness of the interface is at the iPhone level. The hint system will help in case of an incorrect combination of parameters and will inform you about an emergency situation on the line. The technology used ensures that the firmware of the machine will never fall down.


      Template system

      The template system radically reduces the changeover time from one type of product to another. There are 96 templates available for the operator with switching in one touch.

      • Ability to both activate some modules and disable them in templates. For example, turn off the printer and the running-in unit and turn on the container orientator in the template for an oval jerrican.
      • The ability to adjust the delays and speed of operation of any module or the entire line as a whole for different types of products.
      • The ability to create a template of settings for one type of product, then copy the settings to another template and adjust them if necessary, so as not to configure from scratch.

      During the changeover, the operator has to adjust the mechanical settings of the modules to the geometric parameters of the container and set the position of the sensors in height. 

      Request For Equipment

      We'll help you find the right products and pricing for your business. Fill the form below or give us a call +386 69 844 278. You can also send your request to [email protected]