Onitex U100 Roller capping

Roller universal system: adapts to a large range of polymer simple and composite caps, perfect for triggers, dispensers, pipettes.


The design of the machine allows the installation of various modules depending on the task:

Touch screen

All modules of the machine are controlled and configured from the screen, settings templates are switched for different containers. Two synchronized panels for operator convenience.


Adjusting the capping machine to the container height

Step-driven roller capper

Side belt transfers

This unit is adjustable to various product widths.

Stainless steel frame

Provides rigidity of the entire structure and the possibility of easy installation of modules necessary for solving the problem.


Designed for manufacturers with a large range of products and high requirements for the best quality.

We currently provide automatic capping machines to companies operating in the following industries:

  • Food industry
  • Cosmetic industry
  • Tobacco industry
  • Chemical industry


Productivity is up to 3 000 units per hour. 


We currently provide automatic capping machines to companies operating in the following industries:

Synchronous drive

The speed of the conveyor and any machine module does not depend on the load, mains voltage or other external factors: adjustment during operation is not necessary. You can set up the machine and leave it for 10 years: the set speeds and delays of the machine will not change.

Onitex VA100 Control System

The control system and its interface are primarily responsible for ease of operation and readjustment.

Touch screen

The control panel is ready for operation in half a second after the machine is powered on. Any setting is available in two or three finger touches, the responsiveness of the interface is at the iPhone level. The hint system will help in case of an incorrect combination of parameters and will inform you about an emergency situation on the line. The technology used ensures that the firmware of the machine will never fall down.

Template system

The template system radically reduces the changeover time from one type of product to another. There are 96 templates available for the operator with switching in one touch.

  • Ability to both activate some modules and disable them in templates. For example, turn off the printer and the running-in unit and turn on the container orientator in the template for an oval jerrican.
  • The ability to adjust the delays and speed of operation of any module or the entire line as a whole for different types of products.
  • The ability to create a template of settings for one type of product, then copy the settings to another template and adjust them if necessary, so as not to configure from scratch.

During the changeover, the operator has to adjust the mechanical settings of the modules to the geometric parameters of the container and set the position of the sensors in height. 

Request For Equipment

We'll help you find the right products and pricing for your business. Fill the form below or give us a call +386 69 844 278. You can also send your request to [email protected]